EET-W Fine Pole Magnetic Workholding Chucks

For surface grinding workholding applications

  • EDM-READY: fully submersible, brass sealed (More than 1000MΩ of insulation resistance)
  • Hard soldered top plate and solid bottom plate for maximum rigidity and accuracy
  • Low-profile design increases Z-axis stroke
  • Strong magnetic force regulated by controller
  • Magnetic controller demagnetizes workpiece


EET-W chucks thicker bottom plate provides extremely strong magnetic workholding.
Click HERE for magnetic chuck controllers

Model Magnetic Force* Pole Pitch L x W x H Amps Weight
EET-1530W 10,800 lbs. 4(1+3) 6" x 12" x 4.5" 0.73 73 lbs.
EET-1535W 12,600 lbs. 4(1+3) 6" x 14" x 4.5" 0.61 88 lbs.
EET-1545W 16,200 lbs. 4(1+3) 6" x 18" x 4.5" 0.98 110 lbs.
EET-2040W 19,200 lbs. 4(1+3) 8" x 16" x 4.5" 1.1 139 lbs.
EET-2045W 21,600 lbs. 4(1+3) 8" x 18" x 4.5" 1.2 157 lbs.
EET-2050W 24,000 lbs. 4(1+3) 8" x 20" x 4.5" 1.4 176 lbs.
EET-2550W 30,000 lbs. 4(1+3) 10" x 20" x 4.5" 1 247 lbs.
EET-3060W 43,200 lbs. 4(1+3) 12" x 24" x 4.5" 1.5 331 lbs.

*Magnetic force regulated by controller. See page 9 for controllers.
Questions? Call us at: (877) 354-3837 to speak to an applications engineer.
VOLTS: DC90V

 

 

Fine Pole

Fine pole design provides best
holding power on workpieces
over 2mm thick.