EDMT Variable Pole Magnetic Chucks

For surface grinding workholding applications


  • EDM-READY: fully submersible, brass welded faceplate
  • Most powerful “Rare Earth” Neodymium Iron Boron magnets are
    5 times stronger than others
  • Low-profile design increases Z-axis stroke
  • Demagnetizer available upon request


Variable pole design EDMT chucks.

Model
Magnetic Force*
Pole Pitch (P)
L x W x H
Weight
EDMT-1018
4,200 lbs
11.2 (1.6+2+1.6+6)
4" x 7" x 2.5"
16 lbs
EDMT-1325
7,500 lbs
11.2 (1.6+2+1.6+6)
5" x 10" x 2.5"
23 lbs
EDMT-1530
10,800 lbs
11.2 (1.6+2+1.6+6)
6" x 12" x 2.5"
33 lbs
EDMT-1535
12,600 lbs
11.2 (1.6+2+1.6+6)
6" x 14" x 2.5"
38 lbs
EDMT-1545
16,200 lbs
11.2 (1.6+2+1.6+6)
6" x 18" x 2.5"
44 lbs
EDMT-2040
19,200 lbs
11.2 (1.6+2+1.6+6)
8" x 16" x 2.5"
57 lbs
EDMT-2045
21,600 lbs
11.2 (1.6+2+1.6+6)
8" x 18" x 2.5"
66 lbs
EDMT-2050
24,000 lbs
11.2 (1.6+2+1.6+6)
8" x 20" x 2.5"
79 lbs
EDMT-2550
30,000 lbs
4+12
10" x 20" x 2.5"
130 lbs

 

 

All-Purpose
Variable Pole Design

Alternating thick/thin magnetic
poles provides best holding
power for both thick and
thin workpeices.